Ink Film - Panasonic KX-FG6550 Operating Instructions Manual

1. Introduction and Installation
Installation (Base Unit)

1.6 Ink film

The included film roll is a starter ink film.
1.6.1 Installing the ink film
Important:
L Remove all the blue shipping tape from
the unit before installation.
1
Open the front cover by pulling up the center
part.
2
Release the back cover by pushing the green
button (1).
L You can also release the back cover by
pushing in the green lever (2).
2
14 For assistance, please visit http://www.panasonic.com/consumersupport
3
Open the back cover.
4
Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (2).
L The ink film is safe to touch and will not
L Make sure the blue gear (1) and white
1
rub off on your hands like carbon paper.
gear (2) are installed as shown.
2
1