Features (Handset)
8.5 Handset programming
8.6 Direct command chart for handset
For more details on the features, see page 88 to page 91.
Feature
Ringer volume
LINE 1
(Handset)
LINE 2
Ringer tone
LINE 1
(Handset)
LINE 2
Incoming call tone
(Handset)
Message play
Date and time
Voice enhancer
Copy phone book
– Copy 1 item
Copy phone book
– Copy all items
LCD display contrast
Key tone
1
{OFF}
{MENU}
Feature code
Selection
{1}: Low {2}: Medium
{1}{1}{1}
{3}: High (default) {0}: Off
{1}{1}{2}
{1}: "Tone 1" (default for LINE 1)
{1}{2}{1}
{2}: "Tone 2" (default for LINE 2)
{1}{2}{2}
{3}: "Tone 3" {4}: "Tone 4"
{5}: "Melody 1" {6}: "Melody 2"
{7}: "Melody 3" {8}: "Melody 4"
{1}: "On" {2}: "2" (default)
{1}{3}
{0}: "Off"
{2}
Go to step 3 on page 31
{4}
{1}: "On" {0}: "Off" (default)
{5}
Go to step 3 on page 42
{#}{1}
Go to step 3 on page 43
{#}{2}
{1}: Level 1 {2}: Level 2
{0}{1}
{3}: Level 3 (default)
{4}: Level 4 {5}: Level 5
{6}: Level 6
{1}: "On" (default) {0}: "Off"
{0}{2}
8. Programmable Features
Important information
L Make sure the handset and base unit are
not being used.
1
Press {MENU}.
2
Press the code number ({0} to {9}, {*} and
{#}).
3
Press the desired selection to display the
desired setting.
L This step may be slightly different
depending on the feature.
Press {SAVE} (soft key 1).
4
5
Press {OFF}.
Note:
L To exit programming, press {OFF} at any
time.
----------
Page
page 28
page 88
page 88
page 70
----------
page 35
----------
----------
page 88
page 88
85