Panasonic KX-FG6550 Operating Instructions Manual page 23

If you use the unit as a single-line
telephone only
1
LINE 2 LINE1/2
1
1 2-wire telephone line cord with
TRANSPARENT plugs
If you subscribe to a DSL service
L Please attach a noise filter (contact your DSL
provider) to the telephone line between the
base unit and the telephone line jack in the
event of the following:
– Noise is heard during conversations.
– Caller ID features (page 44) do not
function properly.
Connecting a 2-line telephone jack
For this connection, please purchase a
Panasonic 2-line splitter. See page 10 for
accessory information.
Example: DSL line is LINE 2
1
2
a
LINE 2 LINE1/2
2
1
a
For assistance, please visit http://www.panasonic.com/consumersupport
To a single-line
telephone jack
(RJ11C)
LINE1
2-line
splitter
LINE 1 LINE 2
KX-J42
Noise
filter
TRANSPARENT
plug
To a 2-line
Noise filter
telephone
(For DSL
jack
users)
1 2-wire telephone line cord with
TRANSPARENT plugs
2 4-wire telephone line cord with GREEN plugs
Connecting 2 single-line telephone jacks
Example: DSL line is LINE 2
1
2
LINE 2 LINE1/2
2
1
1 2-wire telephone line cord with
TRANSPARENT plugs
2 4-wire telephone line cord with GREEN plugs
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
2. Preparation
To single-line
telephone jacks
(RJ11C)
LINE1 LINE1
Noise filter
LINE2
(For DSL
users)
21