Date And Time - Panasonic KX-FG6550 Operating Instructions Manual

2.12 Date and time

The date and time can be set using either the
handset or the base unit.
2.12.1 With the handset
{e}{v}
Make sure the base unit and the handset are
not being used.
1
Press {MENU}.
2
Press {4}.
L The cursor (|) will appear on the display.
3
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
4
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0}{1}{5}.
2. Press {*} repeatedly to display "PM".
For assistance, please visit http://www.panasonic.com/consumersupport
1
{OFF}
{MENU}
Date:01.01.2005
Time:12:00 AM
0-9=Date&Time
=AM/PM
f g SAVE
Date:08.10.2005
Time:12:00 AM
0-9=Date&Time
=AM/PM
SAVE
f g
Date:08.10.2005
Time:10:15 PM
0-9=Date&Time
=AM/PM
g SAVE
f
Press {SAVE} (soft key 1).
5
L If the handset beeps 3 times, the setting
is not correct. Start again from step 3.
6
Press {OFF}.
To check the date and time
Repeat steps 1 and 2.
L The date and time will be displayed. When
finished, press {OFF}.
To correct a mistake
Press {<} (soft key 1) or {>} (soft key 1),
{v} or {e} to move the cursor to the incorrect
number, and make the correction.
2.12.2 With the base unit
{SET}
{<}{>}
1
Press {MENU}.
2
Press {#}, then {0}{1}.
3
Press {SET}.
L The cursor (|) will appear on the display.
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
2. Preparation
{MENU}
SYSTEM SETUP
PRESS NAVI.[( )]
SET DATE & TIME
PRESS SET
M:| 0 1/D:01/Y:05
TIME: 12:00AM
M:08/D:10/Y:05
TIME: 1 2:00AM
|
M:| 0 8/D:10/Y:05
TIME: 10:15AM
31