Remote Operation; Operating From A Remote Location - Panasonic KX-FG6550 Operating Instructions Manual

Remote Operation

7.5 Operating from a remote location

You can call your unit from a remote location and access the answering machine.
Important:
L Program the remote operation ID beforehand (feature #11 on page 79, or feature 063 on page
89).
L Set the unit to TAM/FAX mode (page 59) or TAM ONLY mode (page 61) before going out.
L Use a touch tone telephone for remote operations.
Helpful hints:
L When you press a key, press firmly.
L Please make a copy of the following table, and carry it with you when you go out.
1. Call your unit.
2. To listen to messages for both lines, enter the
remote operation ID during or after the
greeting message.
L The unit will announce the number of new
messages and they will be played back
automatically.
L To listen to messages for the desired
line(s), enter the remote operation ID, then
press {#}{1} (LINE 1), {#}{2} (LINE 2)
or {#}{0} (LINE1 and LINE 2).
Key Remote command
Repeats a message
{1}
Skips a message
{2}
New message playback
{4}
All message playback
{5}
Stops the current operation
{9}
Erases a specific message
{*}{4}
Erases all messages
{*}{5}
7.5.1 Summary of remote
operation
1
Call your unit.
2
To listen to new messages for both lines,
enter the remote operation ID during or after
the greeting message.
L The unit will announce the number of new
messages and they will be played back
automatically.
To listen to new messages for the desired
line(s), enter the remote operation ID, then
press {#}{1} (LINE 1), {#}{2} (LINE 2) or
{#}{0} (LINE1 and LINE 2).
Answering machine remote operation
{#}{1}{0}
{#}{2}{0}
{#}{0}{0}
{#}{1}{7}
{#}{2}{7}
{#}{0}{7}
{#}{1}{8}
{#}{2}{8}
{#}{0}{8}
7. Answering Machine
Turns OFF the answering machine
for LINE 1.
Turns OFF the answering machine
for LINE 2.
Turns OFF the answering machine
for LINE 1 and LINE 2.
Records greeting message for
LINE 1.
Records greeting message for
LINE 2.
Records greeting message for
LINE 1 and LINE 2.
Turns ON the answering machine
for LINE 1.
Turns ON the answering machine
for LINE 2.
Turns ON the answering machine
for LINE 1 and LINE 2.
L The unit will announce the number of new
messages for the line(s) and they will be
played back automatically (memo
messages will not be played).
3
After 3 seconds, the voice menu will start
(page 74). Follow the menu or enter a remote
command (page 74).
4
To end remote operation, hang up.
OR
To listen to messages for the desired lines,
press {#}{1} (LINE 1), {#}{2} (LINE 2) or
{#}{0} (LINE 1 and LINE 2).
73