Disposal of the Punch Hole Residue
Disposal of the Punch Hole Residue (1Bin Saddle-Stitch Finisher)
When the Container becomes full with punch hole residue, an error message is displayed.
1
Slide the Finisher to the left.
●
Push the Release Button to free the
Finisher from the machine.
2
Pull out the Punch Hole Residue
Container (full).
Punch Hole Residue Container (full)
3
Empty out the Punch Hole Residue
Container.
90
Release Button
4
Insert the Punch Hole Residue
Container (empty).
Punch Hole Residue Container
(empty)
5
Slide the Finisher back until it locks
into place.