Adding Paper <Printing Media; Paper Tray; Sheet Bypass - Panasonic Workio DP-C305 Operating Instructions Manual

Adding Paper <Printing Media>
ATTENTION
●
If you wish to change the preset paper size used in the Paper Tray, contact your authorized Panasonic dealer.
●
Do not place the following types of printing media into the Paper Tray, use the Sheet Bypass instead.
Ex: Transparencies, Label, Envelope
●
When changing the paper type (Plain, Glossy, or Recycled) in the Paper Tray, refer to General Settings (Key
Operator Mode) in the Operating Instructions (For Function Parameters) of provided CD-ROM.
●
Fan the paper and straighten the stack when loading paper to avoid the double feeding or paper jam.
■ ■ ■ ■ ■ Paper Tray
1
Open the Paper Tray.
2
Fan and align papers together, and then load
the papers with printing side facing up.
Add Paper
Paper Capacity : 550 sheets (20 lb)
Paper Weight
3
Close the Paper Tray.
76

Paper Tray

Upper Limit Indicator
: 18-45 lb (Bond Paper)
Paper Tray
■ ■ ■ ■ ■ Sheet Bypass
1
Open and pull out the Sheet Bypass.

Sheet Bypass

2
Load paper with printing side facing
down.
●
Align papers together, and then place the
papers on the Sheet Bypass.
Until it stops