Replacing Toner Waste Container / Cleaning The Lsu Aperture Glass - Panasonic Workio DP-C305 Operating Instructions Manual

Replacing Toner Waste Container / Cleaning the LSU Aperture Glass

Always clean the LSU Aperture Glass at the same time the Toner Waste Container is replaced.
ATTENTION
●
Do not reuse toner from the Toner Waste Container.
●
Do not use the Cleaner if it is dirty.
●
When the toner adheres to the machine, wipe it off with a cloth.
1
Open the Front Cover.
2
Open the box and carefully unzip the
plastic bag. Pull the new Toner Waste
Container out of the box and remove
the plastic wrapping (it will be reused
in step 4) covering the new container.
Plastic Wrapping
3
Pull out the old Toner Waste Container
out of the machine.
Toner Waste Container (old)
●
Exercise care not to incline the container, or
toner may spill.
82
Front Cover
4
Place the old Toner Waste Container
on top of the opened Front Cover.
Cover the old Toner Waste Container
with the plastic wrapping which was
removed in step 2.
Plastic Wrapping
5
Place the old Toner Waste Container
inside the box and zip the plastic bag
closed.
Close Plastic Bag
●
For disposal or recycling information, contact
your local authorities or your local waste
officials.