Jam Error Codes (J Codes) - Panasonic Workio DP-C305 Operating Instructions Manual

Jam Error Codes (J Codes)

Finisher
Section
(Option)
Paper
Transport
Section
(Option)
Paper Tray 1
Paper Tray 2
Paper Tray 3
Paper Tray 4
Removing a Misfed Paper (Locations)
Misfed Location Indicator
Code Check Points
J00 Sheet Bypass (Remove the misfed paper
and load the paper again.)
J01 Paper Tray 1 & Paper Feed Section (Paper
Tray 1-4 & Sheet Bypass) (See page 66)
J02 Paper Tray 2 & Paper Feed Section
(Paper Tray 2) (See page 69)
J03 Paper Tray 3 & Paper Feed Section
(Paper Tray 2-4) (See pages 69 to 70)
J04 Paper Tray 4 & Paper Feed Section
(Paper Tray 3, 4) (See page 70)
J06, J26 Paper Feed Section (Paper Tray 1-4 & Sheet
Bypass) (See pages 66, 69, and 70)
J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 & Optional Paper Tray 3 & 4)
J28 (See pages 69 to 70)
J16, J18, Paper Feed Section
J33-J35 (Paper Tray 1-4 & Sheet Bypass)
Verify that the media type selection in the Control
Panel matches the media loaded on the Trays.
Ex:Select "Transparency" when Transparencies
are loaded in the Sheet Bypass.
(See pages 66, 69, and 70)
ADF (Automatic Document Feeder)
Section
Fuser/Exit Section
Paper Feed Section
(Paper Tray 1-4 &
Sheet Bypass)
ADU Section
Sheet Bypass
Paper Feed Section
(Paper Tray 2)
Paper Feed Section
(Paper Tray 3, 4)
(Option)
●
When a misfed paper occurs, the location and the procedures for
removing misfed paper are displayed frame by frame on the Touch
Panel Display.
Check the location and remove all misfed papers according to
displayed pictures and this manual. (See pages 66 to 75)
Ex: ADU Section
Code
J19
J82, J83, ADU Section & Fuser/Exit Section
J88
J30-J32, Paper Feed Section & Fuser/Exit Section
J38-J40, (See pages 66, 68, 69, and 70)
J42-J45
J41, J50, Fuser/Exit Section & Paper Transport Section
J51, J52, (See pages 68 to 69)
J86
J80, J81, Fuser/Exit Section
J87
J54-J56 Paper Transport Section
J60-J66 Optional Finisher Section
J70-J79, ADF Section
J92-J94 (See pages 74 to 75)
ATTENTION
●
The display indicates the
section of the misfed paper.
Remove the misfed paper
and check to see if the
Misfeed Indicator has been
cleared.
If other locations indicate
presence of paper, remove
them and check the display
again.
●
When clearing a misfed
paper that is difficult, or
impossible to see, turn OFF
the machine and contact the
authorized Panasonic
dealer.
Returns to the 1st step.
Check Points
Paper Feed Section & ADU Section
(See pages 66, 67, 69, and 70)
(See pages 67 to 68)
(See page 68)
(See page 69)
(See pages 71 to 73)
65