Others; Double Exposure - Panasonic Workio DP-C305 Operating Instructions Manual

Others

Double Exposure

Select the Double Exposure copy mode when copying a 2-sided original that is smaller than 5.5" x 8.5" in size onto
a standard size media (Ex: Letter size). One side (Front) of the original is copied at the top of the page and the other
side (Back) is copied at the bottom on the copied media as illustrated below.
Ex: Name card (printed on both side)
Original Size:
(less than 5.5" x 8.5")
ABC
NOTE
●
If the following situation should arise while you are copying an original with the ADF open, close the ADF and
continue copying.
- When a bright light shines on the Platen Glass, the position of the original may not be detected correctly.
- If there are less than 5 mm of white margin on originals, the edge of the copied paper may get blurred in white.
1
Place original on the Platen Glass.
(This feature is not available when using
the ADF.)
Face down.
Align with top left corner.
●
Leave the ADF open while making copies.
2
Press the Copy key if the machine is
set to other function mode.
38
Copy Size:
(Letter)
ABC Front Side Image
DEF
Back Side Image
3
Select "Preset Jobs".
4
Select "M10:Double Exposure".
●
If the Confirmation screen "Ready for M10
Memory Copy" is displayed, select "Close".
●
When selecting "M10:Double Exposure",
the previous settings will be cleared.
Select other settings (Ex: "Sort" copy) after
selecting "M10:Double Exposure".