ATTENTION
Sheet Bypass Capacity
●
Weight
: 15-40 lb (Bond Paper), 90-140 lb (Index Paper, Coated Paper)
●
Size
: 12" x 18" to 5.5" x 8.5" (Invoice)
●
Paper Capacity : 100 sheets (8.5" x 11" / 20 lb)
●
Suitable media : Plain Paper, Thin Paper, Glossy Paper, Recycled Paper, Thick Paper, Coated Paper, Index/Cover
Paper, Heavy Index Paper, Coated/Cover Paper, Heavy Coated Paper, Transparency, or Labels.
●
For more details about media type, see page 98.
3
Adjust the Side Guides.
Side Guides
●
Incorrect adjustment may cause the paper to
wrinkle, misfeed, or skew.
●
If the paper size is not detected, remove the
paper and press the Reset key.
Then, load the Paper again.
●
Ensure to change the media type selection
in the Control Panel when changing the
media loaded on the trays. (Ex: Select
"Transparency" when Transparencies are
loaded in the Sheet Bypass.)
If using other than plain paper, follow the steps below
to set the desired type of printing media.
4
Press the Copy key if the machine is
set to other function mode.
5
Select "Paper/Output Tray".
6
Select "Change Size/Media".
7
Select "Change Type".
●
"Auto" can detect the standard sizes of paper
(11" x 17", Legal, 8.5" x 11", 5.5" x 8.5"). When
selecting "Auto", ensure that standard sizes
of paper are loaded in the trays before printing.
8
Select a printing media type, and then
select "OK".
Select the best suited
media type (see
page 98) to match
the one loaded in
step 3.
●
Preprinted form is represented by a "
Select "OK".
".
77