Replacing Toner Cartridge - Panasonic Workio DP-C305 Operating Instructions Manual

Digital color imaging systems
Hide thumbs Also See for Workio DP-C305:
Table of Contents

Advertisement

Replacing Toner Cartridge

WARNING
!
Never dispose of toner, Toner Cartridge or a Toner Waste Container into an open flame. Toner remaining in the
cartridge can cause an explosion, burns and/or injuries. For disposal or recycling information, contact your local
authorities, or your local waste officials.
ATTENTION
Be sure to use only genuine Panasonic Color Toner designed for this machine.
When the display indicates that the toner is getting low, prepare the new Toner Bottle in advance.
When the black toner runs out, all Copy/Print functions cease to operate.
Even if one of the color toner runs out, monochrome copying/printing will be available.
1
Open the Front Cover.
Make sure that the machine has stopped
before opening the Front Cover.
The location of each color Toner Cartridge is
as shown below.
Yellow
2
Gently turn the Toner Cartridge of the color
displayed on the Touch Panel Display
counterclockwise to the Unlock Mark.
Unlock Mark
78
Front Cover
Magenta
Cyan
Black
Toner Cartridge
3
Pull out the used Toner Cartridge.
4
Shake the new Toner Cartridge to
loosen its contents.
New Toner
Cartridge
Shake it well
(10-15 times)
Shake it up and down, and then turn the
bottom up and repeat.
Toner Cartridge

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workio dp-c265Workio dp-c405

Table of Contents