Planet Networking & Communication IP-1000PT User Manual page 32

Field Name
Voice Mailbox
Numbers
4) Advanced
Field Name
Domain Name Type
Carry Port Information
Signal Port
DTMF Type
RFC2833
Payload(>=96)
Register Refresh
Intervals(sec)
RTP Port
Cancel Message
Enable
Session Refresh Time
(sec)
Refresher
Fill in the mailbox's feature code provided by your server, for example, in
Planet IP PBX, the code is *61.
Use domain name in the SIP URI or not.
Use carry port information in the SIP URI or not.
The default value of the local port of SIP protocol is 5060.
Choose the DTMF type between In-band, RFC2833 and SIP Info.
User can use the default setting.
The interval between two normal register messages. You can use the default
setting.
Set the port to send RTP. IP phone will select one idle port for RTP if you set
'0', otherwise, use the value user set.
When you set enable, an unregistered message will be sent before
registration, while you set disable, unregistered message will not be sent
before registration. You should set the option for a different proxy.
The interval time between two sessions. You can use the default value.
Choose refresher between UAC and UAS.
- 32 -
High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
Description
Description