Planet Networking & Communication IP-1000PT User Manual page 2

High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
Copyright
Copyright (C) 2015 PLANET Technology Corp. All rights reserved.
The products and programs described in this User's Manual are licensed products of PLANET Technology. This User's
Manual contains proprietary information protected by copyright, and this User's Manual and all accompanying
hardware, software, and documentation are copyrighted.
No part of this User's Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form by any means by electronic or mechanical including photocopying, recording, or
information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the
prior written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and
makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and does not represent a commitment on the part
of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information in this User's Manual, and reserves the right
to make improvements to this User's Manual and/or to the products described in this User's Manual, at any time
without notice.
If user finds information in this manual that is incorrect, misleading, or incomplete, we would appreciate user comments
and suggestions.
CE Mark Warning
This is a class B device. In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy saving, please remove the DC-plug
or push the hardware Power Switch to OFF position to disconnect the device from the power circuit.
Without removing the DC-plug or switching off the device, the device will still consume power from the power circuit. In
view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to switch off or
remove the DC-plug from the device if this device is not intended to be active.
- 2 -