Planet Networking & Communication IP-1000PT User Manual page 20

5. WAN Port Login
6. Web Access Port
7. Software Version
1) Pick up phone and press '****' to start IVR;
2) Choose '5', and the VIP-1000PT/VIP-1000T will report on the 'WAN
Port Login';
3) At the prompt, please enter password. Please refer to Operation 1 for
the password input.
4) 'Operation successful' will be reported if operation is properly done.
5) At the prompt '1-enable 2-disable', choose 1 or 2, and end with '#'.
6) 'Operation successful' will be reported if it's done properly.
If you want to quit, press '**'.
1) Pick up phone and press '****' to start IVR;
2) Choose '6', and the VIP-1000PT/VIP-1000T will report on 'Web Access
Port'.
3) At the prompt, please enter password. Please refer to Operation 1 for
the password input.
4) 'Operation successful' will be reported if operation is properly done.
5) Reports on the current Web Access Port;
6) Set the new Web access port and end with '#'.
7) 'Operation successful' will be reported if it's done properly.
If you want to quit, press '**'.
1) Pick up phone and press '****' to start IVR;
2) Choose '7', and the VIP-1000PT/VIP-1000T will report on the current
'Firmware version'.
If you want to quit, press '**'.
- 20 -
High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T