Planet Networking & Communication IP-1000PT User Manual page 19

2. Phone Port
Configuration
3. Factory Reset
4. Reboot
1) Pick up phone and press '****' to start IVR;
2) Choose '1' and then '5', and the VIP-1000PT/VIP-1000T will report on
the current DNS.
3) Input the new DNS and end with '#'.
◆ Use '*' to replace '.'. User can input 192*168*20*1 to set
◆ Press the '#' key to indicate that you have finished.
4) 'Operation successful' will be reported if it's done properly.
If you want to quit, press '**'.
2.1 Phone Number
1) Pick up phone and press '****' to start IVR;
2) Choose '2' and then '1', and the VIP-1000PT/VIP-1000T will report on
the current Phone Number.
If you want to quit, press '**'.
2.2 Server IP Address
1) Pick up phone and press '****' to start IVR;
2) Choose '2', and the VIP-1000PT/VIP-1000T will report on the current
Server IP Address.
If you want to quit, press '**'.
1) Pick up phone and press '****' to start IVR.
2) Choose '3', and the VIP-1000PT/VIP-1000T will report on 'Factory
reset'.
3) At the prompt, please enter password. Please refer to Operation 1 for
the password input.
4) 'Operation successful' will be reported if password is right and then
the VIP-1000PT/VIP-1000T will be set to factory default.
5) Press '4' to reboot to make changes effective.
If you want to quit, press '**'.
1) Pick up phone and press '****' to start IVR;
2) Choose '4', and the VIP-1000PT/VIP-1000T will report on 'Reboot'.
3) At the prompt, please enter password. Refer to Operation 1 for the
password input.
4) The VIP-1000PT/VIP-1000T will reboot if password is right and
operation is done properly.
If you want to quit, press '**'.
High Definition PoE/Non-PoE IP Phone
the new DNS 192.168.20.1.
- 19 -
VIP-1000PT/VIP-1000T