Planet Networking & Communication IP-1000PT User Manual page 16

Step 2b. Connecting Power via PoE Interface and Network
The VIP-1000PT can be configured without external power if connected to an IEEE802.3af PSE device
such as 802.3af PoE injector/hub or 802.3af PoE switch.
Only the VIP-1000PT supports 802.3af power injection; use of any non-standard PoE injector
could damage the device.
S tep 3. Computer Network Setup
Set your computer's IP address to 17
being used for the camera by default). If you don't know how to do this, please ask your network
administrator.
2.16.0.x, where x is a number between 2 to 254 (except 1 which is
- 16 -
High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
PoE Switch
PC