Sip Account; Line 1 - Planet Networking & Communication IP-1000PT User Manual

4.3 SIP Account

4.3.1 Line 1

On this webpage, users can configure the information about SIP account 1, including the following 4
parts: Basic Setup, Audio Configuration, Supplementary Service Subscription and Advanced. The
following are the descriptions about these:
1) Basic Setup
Set the basic information provided by your VoIP Service Provider, such as phone number, account,
password, SIP proxy and so on.
Field Name
Line Enable
Outgoing Call without
Registration
Proxy Server
Outbound Server
Backup Outbound
Server
Proxy port
Outbound Port
Backup Outbound Port
Enable Line 1 or not.
Enable Peer To Peer or not.
If enabled, line 1 will not send register request to SIP server;
In System Status, line 1 status is registered;
Line 1 can make calls out, but others cannot call line1.
Fill in the IP address of your SIP server.
Outbound Proxy IP or domain name.
Backup outbound server IP or domain name.
The value of Proxy Port, the default value is 5060.
The value of Outbound Port, the default value is 5060.
The value of Backup Outbound Port, the default value is 5060.
- 30 -
High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
Description