Problem Solving; Troubleshooting - Panasonic DP-3530 Operating Instructions Manual

Problem Solving

Troubleshooting

Unit Does Not Operate
Does the display light?
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 62)
Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Does the Add Staples indicator and message
appear on the display?
Does the Add Paper indicator and message
appear on the display? (
Does the paper misfeed indicator and
message appear on the display? (
Does E#-## indicator and message appear
on the display?
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Does the exposure indicator say "LIGHTER"?
Does the Add Toner indicator and message
appear on the display? (
86
Check
)
)
)
Action
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Press Energy Saver key on the control panel.
Perform actions in accordance with each
message.
Add Staples (See pages 18-21)
Remove all jammed staples. (See pages 19 and
21)
Add paper. (See pages 14, 16 and 17)
Remove the misfed paper. (See pages 20 - 29)
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON. If the error code
does not clear, call your Service provider.
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON.
Touch the "DARKER" button.
Replace the Toner Bottle.
(See pages 16 and 17)