Panasonic DP-3530 Operating Instructions Manual page 74

Function
For Key Operator
■ Copier Settings
Screen
No.
06 Interleaving Default
07 Page Insertion Default
02/05 08 Cover Mode Default
09 Job Build And SADF Mode
10 Maximum Copy Setting
12 M1, Size
03/05
13 M2, Size
16 Memory Overflow Warning
17 Toner Save Mode (T)
04/05
18 Toner Save Mode (T/P)
19 Toner Save Mode (P)
20 Add New Tandem Desti.
21 Edit Tandem Destination
05/05
22 Delete Tandem Desti.
23 Copier Settings Print
● The Key Operator ID Code is required before any changes can be made to items on this page.
NOTE
∗
74
Modes
Selects OHP interleaving paper
● Blank, Copy
Selects page insertion
● Blank, Copy
Selects cover paper
● F, Blank, F, Copy
FB, Blank, FB, Copy
(F: Front, FB: Front + Back)
Enables or disables the use of SADF function.
● No, Yes
Determines whether to limit number of copies
(0-99).
Inputs a size in job memory 1 for frequently
used size.
● X: 5~432/Y: 5~297 mm
(See page 63)
Inputs a size in job memory 2 for frequently
used size.
● X: 5~432/Y: 5~297 mm
(See page 63)
Selects the task to perform when memory
overflow occurs
● Print, Cancel
Selects the toner save in Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo/Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo mode.
● None, Level 1, Level 2 ∗
Inputs a new destination to split the copy job
Edits the split copy job destination
Deletes the split copy job destination
Prints the copier settings
● Stop, Start
"Level 1 or 2" setting consumes less Toner than "None" setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
Function
Initial
Setting
Blank
Blank
F, Blank
Yes
0
(No limit)
70 x 160 mm
(X) (Y)
95 x 220 mm
(X) (Y)
Print
None
None
None