Panasonic DP-3530 Operating Instructions Manual page 72

Function
For Key Operator
■ General Settings
Screen
No.
30 Sleep/Shutdown Select
31 Print General Settings
32 Corona Wire Cleaning
07/10
33 MAC Address
34 Address Book Group ID
35 Tandem User Parameter
36 Community Name (1)
37 Community Name (2)
08/10
38 Device Name
39 Device Location
40 Daylight Time
41 Routing Menu Function
09/10
42 Doc. Dist. Server Name
43 Doc. Dist. Server IP
NOTE
∗∗
72
Modes
Selects the Sleep/Shutdown mode.
● Sleep, Shutdown
Sets the print of general function.
● Stop, Start
Sets the corona wire cleaning.
● Off, On
Indicates the MAC address.
Inputs group ID for address book.
● 0 ~ 99
Inputs parameter of user machine.
Selects to change the SNMP of Community
Name (1). ∗
● Enables read only.
Selects to change the SNMP of Community
Name (2). ∗
● Enables read/write.
Inputs the device name when necessary. ∗
(For Status Monitor/EtherTalk Machine Name)
Inputs the device location when necessary. ∗
(For Status Monitor)
Sets the daylight time.
● No, Yes
Selects the Document Distribution function ∗∗ .
● No, Yes
Inputs the Document Distribution System
routing server name.
Inputs the Document Distribution System
routing server IP address.
● 3 digits x 4
∗
When Functions No. 36 to 39 are set, cycle the power by turning the Power Switch on the Left
side of the machine OFF and ON.
When the optional Document Distribution System (DA-WR10) is installed.
Function
Initial
Setting
Sleep
0
No
No
0. 0. 0. 0.