Printer Settings - Panasonic DP-3530 Operating Instructions Manual

■ Printer Settings

Screen
Modes
No.
00 Job Completion Time
01 Page Protection
02 Error Page Print
01/03
03 Spool Function
04 Text Print
05 PS Configuration Print
06 Printer Settings Print
07 Font List Print (PCL)
02/03
08 Font List Print (PS)
09 Mailbox Data Holding
10 Delete Mailbox Data
11 Print Queue Delete
03/03
12 AppleTalk Zone Name
13 NetWare
● The Key Operator ID Code is required before any changes can be made to items on this
NOTE
page.
∗
Functions No. 07 to 10 are available when the following options are installed.
Function No. 07: Printer Controller Module (DA-PC602)
Function No. 08: Multi Page Description language Controller Module (DA-MC600)
Functions No. 09 and 10: Hard Disk Drive (DA-HD60)
∗∗
When Function No. 12 is set, cycle the power by turning the Power Switch on the Left Side of
the machine OFF and ON.
Function
Sets the job completion time setting.
● 1~ 999 sec.
Compress automatically then printout.
● Off, On
Sets the error page printout.
● Off, On
Sets the spool function.
● Off, On
Prints text page only.
● Off, On
Prints the PS status page.
● Stop, Start
Prints the printer status.
● Stop, Start
Prints the PCL font list. ∗
● Stop, Start
Prints the PS font list. ∗
● Stop, Start
Sets the automatic holding period of mailbox
data. ∗
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
Deletes the mailbox data. ∗
● All, Before
Sets the delete authorization for the print queue. Key op.
● Free, Key op. (operator)
Inputs an AppleTalk Zone name. ∗∗
● Maximum 32 characters
Sets the NetWare Operating System.
● Off, On (When using IPX/SPX protocol of
Novell NetWare)
Initial
Setting
180
Off
Off
On
On
Start
Start
Start
7 days
Before
On
75