Table of Contents
Advertisement
13.1
The Settings/Meter Check feature is for the system administrator to select the default value of
features as well as to customise the features for use while using the Tools Mode screen.
This section explains the procedure to enter and exit the Tools Mode screen.
13.1.1
Displaying the Tools Mode Screen
The procedure to enter the Tools Mode screen is described here. You need the access
number of the system administrator in order to operate the Settings/ Meter Check
feature.
The factory setting of the access number is "11111".
Procedure
Press the Settings/Meter Check button on the control panel.
Select Tools Mode on the screen displayed.
Enter the access number of the system administrator by using the numeric
keypad and touch Confirm.
182
Tools Mode
Press the Clear C button if you need to correct the input number.
"Changing the access number of the administrator" of "6.3 Configuring the
Machine with Tools Mode" of the Operating Instructions (For Copier).
Advertisement
Table of Contents
