Table of Contents
Advertisement
Select Enable.
Select On for the protocol to be used for NetWare.
Select Save twice.
Select Close twice and then Exit Tools.
The machine will be rebooted.
8.3.2
Other Settings
When necessary, adjust the following settings on the printer. However, the factory setting
of these items do not need to be changed for normal use.
• Print Mode
• PJL Switch
• NetWare Receive Buffer
• IPX/SPX
(Factory setting: PCL*)
(Factory setting: On)
(Factory setting: 256 KB)
(Factory setting: On)
"Chapter 13 Configuring by the Tools Mode Screen" for details on the settings of the
printer.
* If the optional PostScript software kit is installed, factory setting will be Auto.
8.3 Setup for the Printer
127
8
Advertisement
Table of Contents
