Table of Contents
Advertisement
5.2 Setup of the Printer
5.2.2
5
80
Select Enable.
Select Save.
Restart the machine for the changes of setting to take place.
Other Settings
If necessary, define the setting of the following items on the printer. However, there is
no need to change the factory setting of these items for normal use.
• Print Mode
• PJL Switch
• LPD Spool
* If the optional PostScript software kit is installed, factory setting will be Auto.
"Chapter 13 Configuring by the Tools Mode Screen" for details on the printer setting
items.
(factory setting: PCL*)
(factory setting: On)
(factory setting: Hard Disk spool)
Advertisement
Table of Contents
