Printer Setting (User Preset Mode)
This setting should be made only from the control panel of the printer.
GENERAL FUNCTIONS
PRINTER SETTINGS
User preset mode, printer 1/2
00 PCL menu
01 PostScript menu
02 Job menu
03 Parallel menu
04 NIC menu
Screen
Modes
No.
00 PCL menu
01 PostScript menu
(FA-MC350)
02 Job menu
1/2
03 Parallel menu
04 NIC menu
05 Test menu
06 (Reserved)
2/2
07 (Reserved)
08 (Reserved)
09 Set key operator code
C To reset the user preset mode, press User Preset key on the printer control panel
NOTE
# Press the Advanced Function key on the
$ Touch the OFF LINE key on the touch panel
COPIER SETTINGS
% Press the User Preset key on the printer control
& Touch the PRINTER SETTINGS key on the
( Set the desired function(s).
) Press the Advanced Function key and touch
OK
1/2
Font, Symbol set, Pitch, Point size, Line/inch,
Return character
Font, Half tone, Protocol
Resolution, PJL status response, Power save
Time out, Job completion PCL, PostScript
response (Option)
Job completion PCL, PostScript
response (Option)
Test print, Font list print
Input key operator ID number.
41
<Procedures>
printer control panel.
display of the printer.
panel.
touch panel display of the printer.
ON LINE key.
User preset mode, printer 2/2
05 Test menu
06
07
08
09 Set key operator code
2/2
Function
OK
See P .42
See P .44
See P .44
See P .45
See P .45
See P .46