Using The Handset As An Alarm Clock - Gigaset WIDEX W570A Manual

•
When using Eco Mode+ you can ensure that the range of the base is sufficient by
long pressing the talk key
•
When Eco Mode+ is enabled:
•
Call setup is delayed by approx. 2 seconds.
•
The standby time is reduced by about 50%.
•
Registering handsets that do not support Eco Mode+ causes the mode to be deac-
tivated on the base and all other handsets.
•
Activating Eco Mode reduces the range of the base.
•
Eco Mode / Eco Mode+ and repeater support (
if you use a repeater you cannot use Eco Mode or Eco Mode+.

Using the handset as an alarm clock

Activating/deactivating the alarm clock
The time is set
¤
Menu Alarm Clock
After you activate the alarm clock, the menu for setting the wakeup time opens automatically.
Setting the wakeup time
¤
Menu Alarm Clock
OK Enter wakeup time
If the alarm clock is activated, you will see the
display and the wakeup time after it.
The wakeup time is shown in the display only when all
calls in the call lists have been listened to or read.
Setting the alarm clock signal
¤
Menu Alarm Clock
Switching off/repeating the alarm after an interval (snooze mode)
Prerequisite: An alarm call sounds.
¤
Deactivate until the next alarm call: Press Off.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
. You hear the dial tone if the base can be reached.
p. 11).
(
OK Activation
OK Wake-up Time
OK
OK Signal
Using the handset as an alarm clock
p. 47) cancel each other out i.e.,
OK ( = on)
icon in the
OK ( = on)
07:15
10:50
Menu
37