Hapter; Maintenance; Cleaning; Teminal And Base Contacts - VeriFone Omni 3600 Installation Manual

Maintenance

Cleaning

CAUTION
Teminal and Base
Contacts
CAUTION

Card Readers

CAUTION
This section discusses maintenance of the Omni 3600 terminal and Omni 3600
base.
For normal dirt, use a clean cloth slightly dampened with water and a drop or two
mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner.
Never use thinner, acetone, trichloroethylene, or ketone-based
solvents — these chemicals can deteriorate plastic or rubber parts.
Do not spray cleaners or other solutions directly onto the keypad or
display.
Gently swab the contacts with alcohol or contact cleaner to remove dirt. It is
important that the exposed contacts in the docking cradle of the base stay clean
and unbent.
Avoid touching the contacts in the raised area in the center of the base and the
recessed area on the terminal. Finger oils tarnish contacts, causing bad
connections. If the battery charge state or terminal power LEDs do not light when
the terminal is docked or there is a high occurrence of bad or incomplete data
transfers, clean the contacts.
The magnetic and smart card readers require no regular maintenance. For card
reader service, contact your VeriFone distributor or service provider.
Do not attempt to clean the card readers. Doing so may void your warranty.
C

HAPTER

O 3600 I G
MNI NSTALLATION UIDE
4
31