Omni 3600 Terminal Docking; Spare Smart Battery Pack - VeriFone Omni 3600 Installation Manual

1
2
3
Omni 3600 Place the Omni 3600 terminal in the docking cradle
Terminal terminal smart battery, establish communications connections for data transfers,
Docking and communicate with peripheral devices.
The Omni 3600 terminal will not turn off or enter sleep mode while docked on the
NOTE
Omni 3600 base. This ensures that the unit is not placed into sleep mode during
data transfers. The unit must be turned off manually when docked on the
Omni 3600 base. See
Spare Smart Spare smart battery packs for the Omni 3600 terminal can be ordered from
Battery Pack
VeriFone. See
charge a smart battery in the Omni 3600 base, place the smart battery into the
Omni 3600 base spare smart battery dock as shown in
battery dock is keyed so that the smart battery can only be inserted in one way.
Figure 24
Allow the spare battery to remain in the Omni 3600 base unit for a
NOTE
minimum of 2 hours, maximum of 4 hours to ensure the battery
receives a full charge. Note that a new Li-ion battery's full performance
is achieved only after two or three complete charge and discharge
cycles.
Keep a spare smart battery charging in the Omni 3600 base battery dock to
ensure that a fully charged battery is always available.
Insert the round barrel connector into the power port (icon at left) on the far
right of the Omni 3600 base.
Insert the power cable into the power pack.
Plug the power cable into a wall outlet or surge protector. When the
Omni 3600 base is powered, the far-right LED (icon at left) lights steady
green.
Turn On/Off the Omni 3600
Accessories and Documentation
Spare Smart Battery Docking
O

Omni 3600 Terminal Docking

(Figure 23) to recharge the
Terminal.
for ordering information. To
Figure 24. The smart
O 3600 I
MNI NSTALLATION
3600 B
MNI ASE
27
G
UIDE