Table of Contents
Advertisement
Getting
Safety
Started
Ethernet
Installation
Configuration
TCP/IP Configuration for MacOS X
Follow these steps to configure the Ethernet interface on a MacOS X operating sys-
tem.
1
Open System Preferences, either by choosing System Preferences from the
Apple menu or by clicking the System Preferences icon in the dock.
2
Click the Network icon.
3
Choose Automatic from the Location drop-down menu, and Built-in Eth-
ernet from the Show menu.
4
Choose the TCP/IP tab, if necessary.
If you are using TCP/IPv4, go to step 5.
If your cable provider requires TCP/IPv6, go to step 8.
5
Choose Using DHCP from the Configure IPv4 menu.
6
If necessary, click the Renew DHCP Lease button.
7
Close the System Properties application.
TCP/IPv4 configuration is completed.
8
If you are using TCP/IPv6, click Configure IPv6 near the bottom of the pre-
vious window.
9
Choose Automatically from the Configure IPv6 drop-down menu and click
OK.
10 Close the System Properties application.
Touchstone TM1602 Telephony Modem User's Guide
Usage
Troubleshooting
Glossary
22
Hide quick links:
Advertisement
Table of Contents
