Installing A Printer Memory Card - Lexmark W840 User Manual

Installing a printer memory card

Complete the following instructions to install a printer memory card.
1
Remove the system board access panel. (See Accessing the printer system board.)
2
Push open the latches on both ends of the memory card connector.
3
Unpack the memory card.
Warning:
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on the end of the card.
Downloaded From ManualsPrinter.com Manuals
Note: Memory cards designed for other Lexmark printers may not work with your printer.
Printer memory cards are easily damaged by static electricity. Touch something metal such as the
printer frame before you touch a memory card.
Installing a printer memory card
Installing options
28