Display Of Stored Min/Max Values - La Crosse Technology WS-3610 Operation Manual

Hide thumbs Also See for WS-3610:

Table of Contents

Default Settings (Factory Reset) → Allows the reset of all settings and/or stored values to the

factory default → Acknowledge with ‫٭‬CONFIRM‫.٭‬

Leave the basic settings procedure (Setup Mode) with ‫٭‬EXIT‫.٭‬

Display of stored Min/Max Values and Alarm Value Settings

Upon recall, named values display and flash in their respective display sections.

Min/Max and alarm values are recalled from the menu shown below which must be activated by

touching the Touch Screen in the center of the text display section (last two lines at the bottom of

the LCD). Touching the *MINMAX* or *ALARMS* field displays the respective values.

The Min/Max values can also be recalled individually by touching the respective area of the

display. Example: Touching the indoor display will display the menu shown below. Min, Max, and

Alarm values can then be displayed by touching the respective field.

Note: When individual Min/Max values are displayed; the top line of the LCD screen will

automatically display the time and date of their storage.

The following menu item will appear upon touching the ‫٭‬ALARMS‫ ٭‬field. Low and high alarms

are displayed via the respective *LO AL* and *HI AL* fields; the individual values are displayed in

the same manner as individual Min/Max values. (See above)

At any time the opposite respective menu (MIN/MAX or ALARM) can be accessed via its

respective field. The WS-3610 can also be returned to normal display at any time by touching the

*EXIT* field.

Table of Contents