Display Of Stored Min/Max Values And Alarm Value Settings - La Crosse Technology WS-3610-SAL Quick Setup Manual

Once all of the settings have been made, touch ‫٭‬EXIT‫ ٭‬to leave
the basic setup mode.
5 Display of stored Min/Max Values
and Alarm Value Settings
Upon recall, named values will display and flash in their
respective sections.
Min/Max and alarm values are recalled from the menu shown
below which must be activated by touching the Touch Screen in
the center of the text display section (last two lines at the bottom
of the LCD). Touching the *MINMAX* or *ALARMS* field will
display the corresponding values.
The Min/Max values can also be recalled individually by touching
the respective area of the display. Example: Touching the
"Indoor" section of the display will activate the menu shown
below. Min, Max, and Alarm values can then be displayed by
touching the corresponding field.
Note: When individual Min/Max values are displayed; the top line
of the LCD screen will automatically display the time and
date that the data was recorded.
The following menu item will appear upon touching the
‫٭‬ALARMS‫ ٭‬field. Low and high alarms are displayed via the
11