Operating And Setting Of The Rain - La Crosse Technology WS-3610 Operation Manual

The displayed value can be reset to the current value by touching *CONFIRM*. To advance
without resetting, touch ‫٭‬EXIT‫.٭‬
End of Example
Example for Setting of Alarms by means of the HI Alarm
As in the example above, call up the menu on the text section by touching the PRESSURE
section.
Proceed by touching ‫٭‬ALARM‫ ٭‬in the menu section.
Proceed with ‫٭‬HI AL‫ ٭‬in the menu section.
Note: Setting of the LO alarms is possible from here in the same fashion by touching the ‫٭‬LO AL‫٭‬
field.
Set the high alarm value with ‫٭‬UP‫ ٭‬or ‫٭‬DOWN‫.٭‬
Proceed with ‫٭‬ON/OFF‫.٭‬
Activate or deactivate the alarm with ‫٭‬ON‫ ٭‬or ‫٭‬OFF‫.٭‬
Return to normal display with ‫٭‬EXIT‫.٭‬
Note: Activation or deactivation of the alarm (Display or deletion of the (((•))) symbol) only
pertains to the presently displayed value.
End of Example
Note: Touching the PRESSURE section twice toggles the displays of the Relative (rel) and
Absolute (abs) air pressure.
All setting and display facilities only pertain to the presently displayed value.
10 Operating and Setting of the Rain Function
Note: Besides the direct setting of the units for the rain amount in the basic setup procedure, it is
possible to toggle between the following displays by touching the left part of the RAIN
section twice:
•
Rain amount of the last hour
•
Rain amount of the last 24 hours
•
Rain amount of the last week
•
Rain amount of the last month
Note: The rain amounts of the last week and of the last month do not represent the
amounts collected up to the present point of time, but to those of the last complete
week or the last complete month.
All setting and display functions pertain only to the presently displayed value.
9