PIAGGIO MSS X10 500ie Executive Service Station Manual page 79

MSS X10 500ie Executive
Once the main fuse box «A» is removed, unscrew
the screw «F» and remove the cover«E» of the
secondary fuse box.
SECONDARY FUSES
Specification
Fuse No. 1
Fuse No. 2
Fuse No. 3
Fuse No. 4
Fuse No. 5
Fuse No. 6
Fuse No. 7
Fuse No. 8
SECONDARY FUSES
Protected circuits: Powered by battery LV socket, helmet
compartment bulb, turn indicators control device, instrument
panel, antitheft-device pre-installation.
Seat opening actuator ignition switched live and fuel door open-
Protected circuits: Light relay, light switch.
Protected circuits: control unit, injection load relay.
Protected circuits: Electric fan relay.
Protected circuits: satellite navigator pre-installation ignition
switched live, USB socket, shock absorber control device, turn
indicators control device, instrument panel, antitheft device
pre-installation, horn, stop light bulb, starter relay.
Protected circuits: high beam light bulbs ignition switched
live, high beam warning light, antitheft device pre-installation.
Protected circuits (live):Control unit, ABS control unit, immo-
bilizer antenna, anti-tipping sensor, injection load solenoid,
Protected circuits (live):Daylight running light, license plate
light, control lighting, instrument lighting.
Electrical system
Desc./Quantity
Capacity: 15 A
ing actuator.
Capacity: 10A
Capacity: 10A
Capacity: 7.5 A
Capacity: 7.5 A
Capacity: 7.5 A
Capacity: 5A
Light solenoid.
Capacity: 3A
ELE SYS - 79