Parking Brake - PIAGGIO MSS X10 500ie Executive Service Station Manual

MSS X10 500ie Executive
- Release the pipes from the collar.
- Disconnect the pipes from the left brake pump.
INSTALLAZIONE TUBAZIONI FRENO
- Per il montaggio eseguire le operazioni di smontaggio in senso inverso.
THE CONTROL UNIT, SUPPLIED AS A SPARE, IS SEALED AND COMES WITH BRAKE FLUID.
ANY LOSS OF FLUID DUE TO INSTALLATION OPERATIONS CAN BE RESET BY TOPPING UP
THE SYSTEM.
CAUTION
ONCE REFITTING IS FINISHED, BLEED THE SYSTEM.
Locking torques (N*m)
Raccordo olio pompa-tubo 13÷18 Brake fluid pipe-calliper fitting 20 ÷ 25 Front calliper pipe
tightening - distribution mechanism 20 ÷ 25 Brake pipes fixing screw at the distribution mech-
anism 20 ÷ 25 Pump pipe grommet screw - clamp 6 - 10 Pipe fittings - ABS control unit 13 - 18
Rear brake calliper-pipe fitting 20 ÷ 25

Parking brake

CAUTION
LOWERING THE SIDE STAND SIMULTANEOUSLY MOVES THE PARKING BRAKE. BEFORE
LEAVING BE SURE TO HAVE STORED IT.
Braking system
BRAK SYS - 187