MSS X10 500ie Executive
Rear mudguard
- Working on the left side of the vehicle, undo and
remove the two screws fixing the filter box and the
rear mudguard.
- Undo and remove the two fixing screws on the
right side of the vehicle and release the vapour
bleeding pipe of the filter box from the pipe grom-
met.
- Remove the rear mudguard.
Helmet bay
First remove the saddle, battery, the side fairings
and the rear centre cover.
- Unscrew and remove the screw and remove the
fuse-box cover.
- Undo and remove the two screws from the bat-
tery compartment.
Chassis
CHAS - 213