Fig. 11
Integrating the device and the function block into your own project
2.
Select the file
Additional Field Devices è General" .
è
If the entry is not present, the GSD file is not correctly
installed.
3.
Drag the
"gamma/ L" file with the mouse to the Master System -
see the orange arrow in the screenshot below.
ð A small "+" will appear as soon as the cursor is on "Your name
PROFIBUS DP Master System".
4.
As soon as the mouse button is released a pop-up window will be
displayed - see illustration above.
"gamma/ L" under "Profibus-DP
15