Changing The Settings; Displaying The Utilities Screen - Pioneer DDJ-RZX Operating Instructions Manual

Changing the settings

Displaying the utilities screen

Press the [WAKE UP (UTILITY)] button for over 1 second.
The utilities screen appears on a display of this unit.
Description of the screen
1 1
Options settings This unit's settings items are displayed here.
1
Setting The settings for the various items are displayed here.
2
Changing the settings
1 Use the rotary selector to select the setting item.
2 Set the cursor to the item you want to change, then
press the rotary selector.
The cursor moves to the setting.
3 Turn the rotary selector and change the setting.
4 Press the rotary selector to enter the setting.
The cursor returns to the setting.
When the [BACK] button is pressed before entering the setting, the
change is aborted.
When closing the utilities screen, press the [WAKE UP (UTILITY)]
button.
The following settings can be changed:
! MIDI controller setting
! Master output attenuator level setting
! Booth output attenuator level setting
! Setting of the auto standby function
! Setting of talk over function
! Setting of talk over function level
! Cut lag setting of crossfader
! Output setting of microphone to booth monitor
! Peak limiter setting
! Brightness setting of jog ring
! Unit display section brightness setting
! Demo mode and screen saver function setting
! Touch display correction setting
! Monaural/stereo setting of master output
! Monaural/stereo setting of booth output
! Operation setting of microphone sound low cut filter
! Limiter setting of microphone audio added to master output
! Limiter setting of microphone audio added to booth output
38
En
2
2
Forcefully using the unit as the general
MIDI controller
The unit automatically changes operation as follows depending on
whether rekordbox is running.
! When rekordbox is running, controller operation depends on the
rekordbox functions.
! When rekordbox is not running, the unit operates as a general MIDI
controller.
Even though rekordbox is running, you can forcefully operate the unit as
a general MIDI controller.
1 Press the [WAKE UP (UTILITY)] button for over 1
second.
The utilities screen appears on a display of this unit.
2 Use the rotary selector to select and enter [MIDI
MODE].
3 Use the rotary selector to select and enter [AUTO] or
[GENERAL].
— AUTO: Operation automatically changes depending on whether
or not rekordbox is running.
— GENERAL: Regardless of whether or not rekordbox is running,
this unit forcefully operates as a general MIDI controller.
Setting the master output's attenuator
level
! The default is 0 dB.
1 Press the [WAKE UP (UTILITY)] button for over 1
second.
The utilities screen appears on a display of this unit.
2 Use the rotary selector to select and enter [MASTER
ATT.].
3 Use the rotary selector to select and enter one of
[0 dB], [-3 dB], [-6 dB], [-9 dB], and [-12 dB].
Setting the booth output attenuator
level
! The default is 0 dB.
1 Press the [WAKE UP (UTILITY)] button for over 1
second.
The utilities screen appears on a display of this unit.
2 Use the rotary selector to select and enter [BOOTH
ATT.].
3 Use the rotary selector to select and enter one of
[0 dB], [-3 dB], [-6 dB], [-9 dB], and [-12 dB].
Disabling the auto standby function
! When auto standby function is set to on, if 4 hours have passed while
the following conditions are all met, the unit automatically enters
standby status.
— Buttons and controls of the unit except the [MIC1] control and
[MIC2] control are not operated.
— That no audio signals of -18 dB or greater are input to this
unit's input terminals.