Using The Quantize Function; Changing The Settings - Pioneer XDJ-R1 Quick Start Manual

4 INFO(UTILITY) button
! Press:
The main unit display switches to the information display mode.
When in the information display mode, the bottom section of the
display switches between the track name and beat display each
time the button is pressed.
! Press for over 1 second:
The [UTILITY] screen is displayed.
= Changing the settings (p.29)
5 TIME (AUTO CUE,QUANTIZE) button
! Press:
The main unit display's time display mode switches to the
elapsed time or remaining time display.
! Press for over 1 second:
When pressed for over 1 second, auto cue turns on and off.
! [SHIFT] + press:
This turns the QUANTIZE function on and off.
= Using the QUANTIZE function (p.28)
6 Main unit display
7 BACK(TOP) button
! Press:
The screen moves back to the layer above.
! Press for over 1 second:
Press for over 1 second to move to the top layer.
8 Rotary selector
9 This displays the track number.
a REMAIN
This is displayed when the time display is set to the remaining time.
b Time display (minutes, seconds and frames)
c BPM
Displays BPM (Beats Per Minute) of the track currently being played.
d Playing speed display
The value changes according to the position of the [TEMPO] slider.
e TEMPO %
This indicates the percentage by which the playing speed is
changed.
f A. CUE
This is displayed when the auto cue mode is set.
g QUANTIZE
This is displayed when [QUANTIZE] is turned on.
h INFO
This is displayed when the main unit display is set to the information
display mode.
i BROWSE
This is displayed when the main unit display is set to the browse
display mode.
j Playing address display
This displays a track as a bar graph. The graph lights up from the left
edge when the elapsed time is displayed and turns off from the left
edge when the remaining time is displayed. The entire graphs starts
flashing slowly when only 30 seconds remain to the end of the track,
then starts flashing quickly when only 15 seconds remain.
k Information display section
Switching the browse display mode
There are two types of browse display modes: library browse and folder
browse. The display mode differs according to whether or not rekordbox
library information is stored on the USB device.
22
En
— When library information is stored on the USB device: The informa-
tion is displayed in the library browse mode. The music files are
displayed in the categories (album, artist, etc.) set with rekordbox.
— When no library information is stored on the USB device: The infor-
mation is displayed in the folder browse mode. The folders and tracks
on the medium are displayed in a tree structure.
Switching the information display mode
The bottom section of the display switches between the track name and
beat display each time the [INFO(UTILITY)] button is pressed.
 Using the beat display function
This displays the beat and playback position of the currently playing
track.
1
1 beat
1 measure
2
3
1 Beat display section
2 Auto loop/effect display section
3 Input source display section
! When display of track name is selected in the information display
mode, the mode automatically switches to the beat display when one
of the operations below is performed.
— Scratch
— Auto beat loop setting
— Effect setting
— [DECK, PHONO/LINE] selector switch switching
Setting auto cue
When a track is loaded or the track search operation is performed, the
silent section at the beginning of the track is skipped and the cue point
is automatically set at the point immediately before the sound starts.
Press the [TIME (AUTO CUE, QUANTIZE)] button for over
1 second.
Auto cue is set to on.
[A. CUE] is displayed on the main unit display.
! When the [TIME (AUTO CUE, QUANTIZE)] button is pressed again
for over 1 second, auto cue is set to off.
! The auto cue level setting remains in the memory, even when the
power is turned off.
1/2 beat