Layout Menu Options - Canon LBP3460 User Manual

LAYOUT MENU Options

COPIES
OFFSET Y/OFFSET X
Downloaded from ManualsPrinter.com Manuals
1 to 9999; 1*
Specifies the number of copies to be printed.
The printer prints the specified number of copies.
-50.0 to 50.0; 0.0* (mm)
Adjusts the printing position in the vertical direction (Y) or the horizontal direction
(X) by the specified value.
The printing position changes as follows according to the increase and decrease
of the specified value.
OFFSET Y: As the value increases, the gutter width in the Y direction
increases.
As the value decreases, the gutter width in the Y direction
decreases.
OFFSET X: As the value increases, the gutter width in the X direction
increases.
As the value decreases, the gutter width in the X direction
decreases.
Front Back
ABC DEF
Adjust using
OFFSET X
and OFFSET Y
IMPORTANT
If any part of the print image lies outside the printable area after adjusting the
printing position, the part will be missing in the print result.
NOTE
Each time you press [
time you press [ ], the value decreases in 0.5 mm increments. If you keep
holding down [ ] or [
Range adjusted by "OFFSET X"
X
Y
Range adjusted
by "OFFSET Y"
], the value increases in 0.5 mm increments, and each
], the speed of the value changing is increased.
X
+ direction
Front Back
Y
ABC DEF
SETUP Menu Settings
5
5-23