Problems With The Printout Results - Canon LBP3460 User Manual

Cause 4
Remedy
Cause 5
Remedy

Problems with the Printout Results

Unreadable characters are printed.
Cause 1
Remedy
Cause 2
Remedy
A blank page cannot be printed.
Cause
Remedy
The last page cannot be printed.
Cause
Remedy
Downloaded from ManualsPrinter.com Manuals
You are using UFR II Printer Driver, and you loaded custom paper of its long
edges 215.9 mm or less and printed when TRAY PAPER SIZE, CASSETTE1
SIZE, or CASSETTE2 SIZE in the FEEDER MENU options in the SETUP menu
was set to MIXED SIZE.
Load the paper in landscape orientation, then print again.
There is still jammed paper inside the printer.
Remove any jammed paper and print again. (See "Paper Jams," on p. 7-4)
The data is printed from Windows without the supplied printer driver installed for
Windows.
Install the supplied printer driver for Windows, then print again. (See Driver
Guide)
The printer setting in the DOS application is not appropriate.
Specify the printer setting in the DOS application to the one that is compatible
with this printer. (See Driver Guide)
PAPER SAVE is set to ON.
When printing a blank page, set PAPER SAVE (p. 5-38, p. 5-42) to OFF.
The command that notifies of the end of the data is not sent from the computer
(the Job indicator is on).
Press [Online] to place the printer offline, then select FORM FEED in the
RESET menu (If you print using an application that does not have a printing
function, the last page in which data is less than one page remains in the
memory). (See "Canceling a Job," on p. 2-9)
When You Cannot Obtain Appropriate Printout Results
7
7-39