Canon LBP3460 User Manual page 239

<F2 NO FONT>
Cause
Remedy 1 The printer continues printing by pressing [Online]. However, unregistered fonts
Remedy 2 Register the fonts in the memory again or create a form using usable registered
<F9-nn PWR OFF>ON> ("nn" represents two-digit alphanumeric characters)
Cause
Remedy
<FF FONT FULL>
Cause
7
Remedy
<FM SIZE ERROR>
Cause
Remedy
<FM SCALE ERROR>
Cause
Remedy
7-32 Message List
Downloaded from ManualsPrinter.com Manuals
The registered fonts used for creating overlay forms had been deleted during
printing.
are not printed.
fonts, and then print again.
A problem has occurred while the printer is processing print data.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
Because of too many fonts to be registered, the field (font table) for registering
font information has run out and overflowed.
The printer continues printing by pressing [Online]. However, the page with
which an error has occurred is not printed properly.
There is some font with its size exceeds the pseudo-scalable font size.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
There is a character in which the number of coordinate points on the contour
lines exceeds the limitation of a pseudo-scalable font.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
<Error Skip>
<Error Skip>
<Error Skip>
<Error Skip>