Canon LBP3460 User Manual page 248

The next page is printed from halfway across the previous page.
Cause
Remedy
Data is printed with its size reduced.
Cause
Remedy
Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Paper curls.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy
Downloaded from ManualsPrinter.com Manuals
"Line Spacing" or "Lines/Page" in the application is not specified properly.
Specify the settings for "Line Spacing" and "Lines/Page" in the application so
that data fits in one page, and print again. (See the instruction manual supplied
with your application)
The printer is set to reduce the print size.
Confirm the setting for [Manual Scaling] in the printer driver. (See Driver Guide)
Paper is loaded in the paper cassette or multi-purpose tray at an angle.
Load the paper in the paper cassette or multi-purpose tray straight. (See
"Loading Paper in the Paper Cassette," on p. 3-23, "Loading Paper in the
Multi-purpose Tray," on p. 3-39)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 3-2)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 3-2)
Paper is inappropriate.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 3-2)
The paper is too thin.
Set [Paper Type] to [Plain L] in the printer driver.
In order to specify the setting for [Paper Type], display the [Paper Source] sheet.
Paper that curls easily is output to the face-down output tray.
When printing transparencies or envelopes that curl easily, switch an output tray
to the face-up output tray. (See "Output Trays," on p. 3-15)
When You Cannot Obtain Appropriate Printout Results
7
7-41