Canon LBP3460 User Manual page 234

<32 2-SIDED ERROR>
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy 1 The printer continues printing by pressing [Online]. However, the data on each
Remedy 2 Perform a soft reset in the RESET menu, change the paper size of the data to
<33 WORK MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing [Online]. However, the data with
IMPORTANT
When you continue printing by pressing [Online], be aware that the data of overlay or
macro that is already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
<35 TABLE FULL>
Cause
Remedy
Downloaded from ManualsPrinter.com Manuals
Paper on which automatic 2-sided printing cannot performed is selected.
Select a standard paper size for the paper source and paper size setting in the
computer, and then print again.
The memory for performing 2-sided printing cannot be secured.
Increase the free space of RAM using the following procedure, then print again.
Delete the registered data.
•
Install an optional expansion RAM module. (See Getting Started Guide)
•
The printer received data for 2-sided printing on which the printer cannot
perform automatic 2-sided printing.
side is printed on two pages.
the one on which the printer can perform 2-sided printing, and then print again.
The work memory for each operation mode cannot be secured.
which an error has occurred is not printed properly.
the following procedure, and then print again.
Perform a hard reset or cycle the power of the printer (Be aware that all the
•
data in the memory that the printer has received will be deleted).
If you are using UFR II Printer Driver, install an optional expansion RAM
•
module. However, the problem may not be solved even after the expansion
RAM module is installed.
The number of the documents in a job has exceeded 16.
The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.
<Error Skip>
<Error Skip>
<Error Skip>
Message List 7-27
7