Std Paper Size; Tray Priority - Canon LBP3460 User Manual

STD PAPER SIZE

TRAY PRIORITY

Downloaded from ManualsPrinter.com Manuals
- Make sure that the size of the paper loaded in the paper cassette matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the paper cassette before using the
printer. However, if SPECIAL MODE J (See p. 5-36) is set to ON, the printer prints
without checking the paper size even when the paper size specified in the printer
driver and the size of the paper loaded in the paper cassette do not match.
- When printing from UFR II Printer Driver, you can load paper either in portrait or
landscape orientation. However, when printing custom size paper of its long
edges 215.9 mm or less, load the paper in landscape orientation. When you are
not using UFR II Printer Driver, load the paper in portrait orientation.
NOTE
Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size
•
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press [Online] to clear the error before
printing again.
You can obtain the same result by specifying the setting for CASSETTE2 SIZE in
•
the SELECT FEEDER menu.
This option is displayed only when the optional paper feeder is installed.
•
A4*, LTR, LGL, EXEC, ENV. ISO-C5, ENV. COM10, ENV. MONARCH, ENV. DL,
ENV. ISO-B5, A5, B5
Specifies a standard paper size for when the printer cannot determine the size of
the paper to process, such as when using paper that you cannot specify its size in
an application.
IMPORTANT
When printing from Windows or Macintosh, specify the paper size in the printer
driver. When you want to print from a computer in which an operating system such
as MS-DOS and UNIX is used and cannot specify the paper size, specify the size
in this item.
OFF*, ON
Specifies whether the printer should detect the paper source in order starting with
the multi-purpose tray when AUTO is specified in the SELECT FEEDER menu.
If OFF is specified, the printer detects if the size of the paper in a paper source
matches the paper size of the received data in the following order.
Cassette 1 ➞ Cassette 2 * 1 ➞ Multi-purpose Tray
SETUP Menu Settings
5
5-19