Palm Tungsten Tungsten T Handhelds Handbook page 233

To use a calling card:
From the Communications Preferences screen, select Network.
1.
Tap the Phone box.
2.
Tap the Use calling card check box to select it.
3.
Select this
box to use a
calling card
Enter your calling card number on the Use calling card line.
4.
The Phone Setup dialog box works correctly for AT&T and Sprint long-
NOTE
distance services. However, because MCI works differently, MCI customers
need to enter the calling card number in the Phone # field and the phone
number in the Use calling card field.
It's a good idea to add at least three commas before your calling card
TIP
number to compensate for the cue delay.
Tap OK.
5.
Tap Done.
6.
Connecting to your service
After you set your Connection and Network Preferences, establishing a connection
to your ISP or your company's network (dial-in server) is easy.
If you are connecting to an ISP , you need a third-party application, such as a
NOTE
web browser or news reader, to take advantage of this connection. For information
about third-party applications that support TCP/IP , check the web site www.palm.com.
To establish a connection:
From the Communications Preferences screen, select Network.
1.
Tap Connect to dial the current service and display the Service Connection
2.
Progress messages.
(Optional) From the Service Connection Progress dialog box, tap the box that
3.
displays the service name, select another service, and then tap Done.
To see expanded Service Connection Progress messages, press Down on the
navigator.
Tap Done.
4.
Setting Communication Preferences
Enter your
calling card
number here
223