Performing A Network Hotsync Operation; Using File Link - Palm Tungsten Tungsten T Handhelds Handbook

Tap Service and select a service.
8.
Tap here
Tap Done.
9.
Tap the Menu icon
10.
Select Conduit Setup on the Options menu.
11.
For instructions, see
earlier in this chapter.

Performing a network HotSync operation

After you prepare your computer and your handheld and select your Conduit
Setup options, you are ready to perform a network HotSync operation.
To perform a network HotSync operation:
Tap the modem HotSync icon to begin the operation.

Using File Link

The File Link feature enables you to import Address Book and Memo Pad
information onto your handheld from a separate external file such as a company
phone list. HotSync Manager stores the data in a separate category on your Palm
Desktop software and your handheld. You can configure the File Link feature to
check for changes to the external file when you perform a HotSync operation.
.
"Selecting the conduits for a modem HotSync operation"
Using File Link
181