Conducting Cradle/Cable Hotsync Operations; Performing A Cradle/Cable Hotsync Operation: Windows Computers - Palm Tungsten Tungsten T Handhelds Handbook

Chapter 16 Performing HotSync
Click Conduit Settings.
5.
For each application, click the direction in which you want to write data, or click
6.
Do Nothing to skip data transfer for an application.
Changing the HotSync setting from the default affects only the next HotSync
operation. Thereafter, the HotSync Actions revert to their default settings. To
use a new setting on an ongoing basis, click Make Default. Thereafter, whatever
you selected as the default setting is used for HotSync operations.
Click OK.
7 .
Close the Conduit Settings window.
8.

Conducting cradle/cable HotSync operations

The simplest way to synchronize data is to perform a direct HotSync operation by
seating your handheld in the cradle/cable and pressing the HotSync button.

Performing a cradle/cable HotSync operation: Windows computers

The first time you synchronize your data, you need to enter user information on
Palm Desktop software. After you enter this information and synchronize with
your handheld, the HotSync Manager recognizes your handheld and doesn't ask
for this information again.
162
® Operations