Using The Backlight; Locating Back Panel Components - Palm Tungsten Tungsten T Handhelds Handbook

Using the backlight

If lighting conditions make it difficult for you to see the information on your
handheld, you can adjust the brightness of the screen backlight or turn it off. The
backlight remains on until you turn it off. Turning the backlight off conserves
battery power.
To adjust the brightness of the backlight:
Tap the Brightness icon
1.
Tap the Enable Backlight check box to select it.
2.
Drag the slider to adjust the brightness.
3.
TIP
Tap Done.
4.
To turn the backlight on and off:
Press and hold the power button for about two seconds or until the backlight
turns off or on.
TIP
backlight. See

Locating back panel components

Universal
connector
You can also press Up or Down on the navigator to adjust the brightness.
In addition, you can assign the full-screen pen stroke to activate the
"Pen preferences"
in the upper-right corner of the Graffiti writing area.
in Chapter 17 for details.
Reset
button
Attach
points
Locating handheld components
13